Best UP27M30SB Installationshandbuch PDF herunterladen (Seite 10)

15. REINSTALL THE PAN

Insert the front of the pan inside the hood (), while its front rests on inner front of hood, start mounting the pan by the back retaining

screws () (2 or 4 according to hood width), then, screw the front of the pan to the hood using remaining screws (previously removed in

step 5).



HD0117

16. REINSTALL HYBRID BAFFLE FILTERS

CAUTION

Remove protective plastic film covering hybrid baffle filters before installing them.

It is recommended to install side filters first and finish with center

one.

 Insert the end with filter spring clip of hybrid baffle filter into the

front channel of the hood.

 Raise the other end toward the inside of hood and insert in the

grease drip rail of the hood.

Replacement filters are available from your dealer. See label inside

hood for size and part number.

HD0550



17. LIGHT BULBS REPLACEMENT

This hood requires 120 V, 50 W, MR16 or PAR16 with GU10 base, shielded halogen lamps (included).

1. To remove lamps, gently push upwards and turn counterclockwise to

disengage bulb leads from their grooves.

2. Install the new lamps by placing the bulb leads into their grooves in

the socket.

3. Gently push upwards and turn clockwise until secure.

NOTE: To ease removal of the bulbs, use a rubber dishwashing

glove or use suction cup tool available from Best. Contact

Best Technical Support at 1-800-558-1711 to order suction

cup tool, part no. 99526707.

WARNING

Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of personal injury,

only install shielded halogen lamps. Also, never install a cool beam, a dichroïc lamp, a lamp not suitable for use in

recessed luminaires or identified for use in enclosed fixtures.

12 3

HO0089

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Keine Kommentare

Best UP27M30SB Installationshandbuch Seite 10