Best CC34IQSB Bedienungsanleitung PDF herunterladen (Seite 5)

- 5 -

HOOD

CONTROL

REMOTE CONTROL

The remote control is linked to the hood at the factory.

If, for some reason, the link is lost - follow the directions below:

To Link Remote Control to Hood

1. Turn off hood motor and hood lights.

2. Press P1 on the remote control for at least 3 seconds. The indicator light will light up. (Fig. 3)

3. While holding P1 on the remote control - press P2 on the hood control. (Fig. 4) The LED ring

will light up GREEN for approximately 10 seconds to confim that the linking process was

successful.

P3 P4

P1: Activate/deactivate delay-off (10 minute)

P2: Filter change indication timer reset

P3: Decreases fan motor speed until turned off (4>3>2>1>OFF)

P4: Turns fan motor on and increased speed (ON>1>2>3>4)

P5: Turns lights on/off

L1: LED Indicator Ring Signalling crown:

- Hood in standby: lights up green. 30 seconds after

the last key has been pressed the crown turns off

- Motor on: L1 lights up blue

The

frequency is proportional to the speed setting.

- 10’ TIMER function : L1 lights up and flashes blue.

- Filter alarm active: L1 lights up red

LED

RING

INDICATOR

LIGHT

FIG. 4

FIG. 3

- 23A +

HOOD

P1: 5' TIMER function activation/deactivation.

hood sensor: AUTOMATIC function activation/

deactivation.

P2: Motor off/motor speed decrease.

P3: Motor on/motor speed increase.

P4: Lights on/off.

As soon as the button is

pressed, the circular crown

lights up for 1".

Battery disposal

When the batteries need to be replaced, dispose of them only and exclusively in the numerous readily available

special waste bins, especially in shops selling electronic consumer goods. Observance of the regulations on

differentiated waste collection, in particular, proper disposal of used batteries, contributes to preventing possible

negative effects on the environment and health.

LINKING procedure

- To unambiguously associate the radio control with

the hood, you can activate a LINKING procedure.

Once the procedure has terminated, the radio

control functions only and exclusively with the

associated product.

- This procedure is useful if there are two or more

products that can be controlled by means of radio

control, for example, in apartments with adjacent

kitchens, showrooms, fairs, etc.

1 - Turn off the hood motor and the lights

2 - Press P1 for 3": the circular crown will light up

3 - Confirm the link to the hood within 3" by pressing

the button indicated on the next page.

Confirm P2

CAUTION RISK OF EXPLOSION IF BATTERY IS

REPLACED BY AN INCORRECT TYPE. DISPOSE

OF USED BATTE TO THE INSTRUCTION.

Remote Control Functions (Fig.3)

Delay - Off

Blower Speed Decrease and Off

Blower Speed Increase and On

Light

See “Controls” section on previous page for more information on each function.

- 23A +

HOOD

P1: 5' TIMER function activation/deactivation.

hood sensor: AUTOMATIC function activation/

deactivation.

P2: Motor off/motor speed decrease.

P3: Motor on/motor speed increase.

P4: Lights on/off.

As soon as the button is

pressed, the circular crown

lights up for 1".

Battery disposal

When the batteries need to be replaced, dispose of them only and exclusively in the numerous readily available

special waste bins, especially in shops selling electronic consumer goods. Observance of the regulations on

differentiated waste collection, in particular, proper disposal of used batteries, contributes to preventing possible

negative effects on the environment and health.

LINKING procedure

- To unambiguously associate the radio control with

the hood, you can activate a LINKING procedure.

Once the procedure has terminated, the radio

control functions only and exclusively with the

associated product.

- This procedure is useful if there are two or more

products that can be controlled by means of radio

control, for example, in apartments with adjacent

kitchens, showrooms, fairs, etc.

1 - Turn off the hood motor and the lights

2 - Press P1 for

3": the circular crown will light up

3 - Confirm the link to the hood within 3" by pressing

the button indicated on the next page.

Confirm P2

CAUTION RISK OF EXPLOSION IF BATTERY IS

REPLACED BY AN INCORRECT TYPE. DISPOSE

OF USED BATTE TO THE INSTRUCTION.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Best CC34IQSB Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Dunstabzugshauben Best CC34IQSB